Ace Heath Zenith 598-1214-03 Manual De Instrucciones página 11

3. Adjust Range Control. To increase sensitivity,
turn the RANGE control toward MAX. To de-
crease sensitivity, turn the RANGE control toward
MIN. Note: If the RANGE is set too high, false
triggering may result in some environments.
Note: When using test mode to check operation
in the day time:
A. Set the DETECT control switch to DAY/
NIGHT (see Figure 4) and
B. Set the ON-TIME control to TEST (see
Figure 6).
aim sensor down
for short Coverage
Figure 7 - Adjusting Motion Sensor Coverage
8 ft.
(2.4 m)
Maximum Range
598-1214-03
70 ft.
(21 m)
Figure 8 - Coverage Area
aim sensor higher
for Long Coverage
Maximum
Coverage Angle
180°
11