4. Set ON-TIME Control. Determine the amount of
time you want the connected device to stay on
after motion is detected (1 or 5 minutes). Slide the
ON-TIME control to the corresponding setting.
ImporTaNT: Avoid Aiming Control At:
• Objects that change temperature rapidly, such as
heating vents and air conditioners. These heat
sources could cause false triggering.
• Areas where pets or traffic may trigger the control.
• Nearby large, light colored objects reflecting
light may trigger the shut-off feature. Do not
point other lights at the sensor.
Motion
Sensor
Least Sensitive
The detector is most sensitive to motion across its
field of view.
Figure 9 - Motion Sensor Sensitivity
12
Motion
Sensor
Most Sensitive
598-1214-03