Ace Heath Zenith 598-1214-03 Manual De Instrucciones página 7

optional Car Visor Clip (included)
The remote control includes an optional car visor
clip for added convenience that may be installed.
1. To attach car visor clip to remote control (if
desired) push it into slot on rear of remote unit
until it snaps into place (see Figure 3).
2. To remove car visor clip, insert a small, flat-
head screwdriver into slot on back of remote.
Gently push down on portion of visor clip inside
slot with screwdriver while pulling clip out of
remote from top (see Figure 3).
Flat-Head
Screwdriver
Figure 3 - Removing Visor Clip (Rear View)
598-1214-03
Optional
Visor Clip
7