Uline H-4008 Manual Del Usuario

H-4008
INSTANT BUBBLE ROLL
MACHINE
BEFORE OPERATING THIS MACHINE:
1. Read and thoroughly understand this guide.
2. Read and understand all safety instruction labels
attached to the system.
3. Be sure the system is plugged into a properly rated,
grounded outlet.
WARNING! Failure to properly ground the
system could create an electrical shock
hazard.
WARNING! Do not remove the guards or access
covers.
WARNING! Risk of entrapment – Keep fingers,
loose hair, clothing and jewelry away from
the edge seal roller when material is feeding,
inflating and sealing.
WARNING! Hot Surface – Edge seal roller will
become hot during use.
WARNING! Do not use the material as a
flotation device, toy or pillow.
PAGE 1 OF 30
1-800-295-5510
uline.com
SAFETY
4. Inspect at regular intervals to ensure that:
• Component cables are not cut, broken or
damaged.
• All controls and indicators function properly.
5. Airborne Noise Emission:
• This machine does not exceed 80 decibels during
normal operation. Please check to make sure
you comply with your local health and safety
requirements.
6. Environmental Conditions:
• Storage temperature:
• Operating temperature:
Para Español, vea páginas 11-20.
Pour le français, consulter les pages 21-30.
Machine and material rolls – 32˚-110˚F (0˚-43˚C).
Machine and material rolls – 60˚-110˚F (16˚-43˚C).
0521 IH-4008