Uline H-4008 Manual Del Usuario página 5

3. Use the arrow keys to move the cursor to Film Type.
Press the SELECT button on the left to select Film Type.
(See Figure 6)
Figure 6
ENGINEERING
>Film Type
Inflation
SELECT
PRODUCING AIR-FILLED MATERIAL IN
BATCH MODE
1. Select Batch Mode.
• Press and hold the start key for 5 seconds to enter
Batch Mode.
2. Adjust the batch length.
• Using the Up/Down arrows ( / ), set the batch
length in feet.
3. Press the start key.
• Press the start key to begin batching.
• Press the stop key to pause batching.
PAGE 5 OF 30
FILM CODE SETTINGS CONTINUED
4
A08C
15
BACK
OPERATION
4. Use the arrow keys and SELECT button to set each
digit to match the film code for the corresponding
item number. After the last digit has been set, press
the SELECT button to save the film code. (See Figure 7)
Figure 7
FILM TYPE
>Film Type
SELECT
BATCH
Screen
Batch Size
To Go
Start
Key
4S
A08C*
^
BACK
Up
Arrow
003
Down
003
Arrow
Stop
Key
0521 IH-4008