CASUALPLAY S-TWINNER Manual Del Usuario página 18

THE CHILD SHOULD NOT BE IN THE SEAT WHILE ANY CHANGES ARE MADE TO
IT (CHANGING THE WAY IT FACES, FITTING OR REMOVING THE SEAT).
CHANGING THE WAY THE SEAT FACES (illustrations 18-21)
• Put the parking brake on.
• Press the side buttons on both sides of the seat. A red mark will appear in the window
(Fig.18). Then pull the seat upwards (Fig.19).
• Install the seat in the required position (Fig.20) and make sure that the green mark
appears in the window indicating it is correctly fastened (Fig.21). The child can now be
placed in the seat.
ADJUSTING THE SAFETY HARNESS (illustrations 22-24)
• Put the parking brake on (Fig.22).
• Check that the safety harness is open before placing the child in the seat.
• Seat the child, adjusting the height of the chest straps and the abdominal belt of the
harness (A) to fit the child (Fig.23).
• Fasten all the parts of the fastening clip: chest straps, abdominal belt and crotch strap
(Fig.24).
ADJUSTING THE BACKREST (illustrations 25-27)
• The backrest has 2 reclining positions.
• Pull the lever situated on the back of the seat upwards (Fig.25), and place the backrest
in the required position (Figs.26-27). Once the position has been chosen, release the
lever on the back.
FOLDING THE S-TWINNER (illustrations 28-33)
• Remove the seats, the Prima or the Baby Zero Plus.
• Unlock the safety latch (Fig.28).
• Simultaneously lift the buttons on the handlebar (Fig.29) and pull the pushchair handle
forwards (Fig.30).
• With the brake on, push the handlebar downwards until the pushchair is in the position
shown (Fig.31).
• Make sure that the safety fastener is in place. It clicks when in the correct position
(Fig.32).
• Close the safety catch (Fig.33).
BASKET
• The basket fastens onto the lower part of the frame with clasps, to remove it simply undo
the clasps.
• The maximum weight the basket can carry is 5 kgs.
• It is advisable to empty the basket before folding the pushchair up.
16
WARNING: