Technical Features - Altrad MIX125 Manual De Instrucciones

1 - PRESENTATION:
IRBAL concrete mixers have been conceived to fully execute the hardest jobs under the worst conditions.
Its design has been studied and the materials that intervene in its manufacture chosen; in order to obtain a robust and swift set of modern
conception. Its perfectly balanced transmission and rotation mechanisms as well as the double effect mixers surpass conventional productivity.
Our goal is to improve and make the work of the machines that we produce more efficient. For this reason we reserve the right to vary its
mechanisms, forms etc. IRBAL concrete mixers have the CE marking fulfilling the standards in force according to European regulations..
2 — GENERAL SECURITY INSTRUCTIONS
When using this equipment be sure to follow the regulations applied in order to reduce the risk inherent to its usage.
-» Read this Instruction Manual intently.
-» Only use the machine according to the instructions in this manual
-» The operator should be fully trained and qualified to operate this machine.
-» The operator should wear adequate clothes like close-fitting clothing, keep hair tied and should be familiar with the functioning of the machine;
protective equipment such as gloves, dust mask and eye protection should be used at all time when using cement.
-» Always keep the work zone clean, free of objects and with the necessary illumination.
-» It is forbidden to remove or alter any security device. If any alteration is verified, Irbal declines any responsibility in eventual damages to
people or objects.
-» Any electronic work should be done by qualified personnel only. (only original equipment and insulation material can be used)
-» Perform the maintenance recommended in this manual and respect its regularity.
-» When cleaning or performing maintenance on the machine, disconnect it from the power supply.
-» Never operate the machine under the influence of alcohol, drugs or medication that might influence physical capacity.
-» warning regarding the hazard of the inhalation of fumes
-» regarding hazards from materials likely to be used, especially contact, inhalation or ingestion of cement or additives use protective equipment.
-» Machine (concrete mixer) shall not be operating when it is being moved.
-» Position the mixer on levelled, solid and flat ground.
-» Do not reach into the drum interior while drum is rotating ( beware of cutting blades).
3 – TECHNICAL FEATURES
Model
Bucket Capacity (L)
Mixing Capacity (L)
Bucket Diameter (MM)
Direction of Rotation
Wheel Dimension (MM)
Bucket rotation (r/min)
Power Supply (V)
Engine Power (kW)
Rated Current (A)
Max Current (A)
Motor Rotation (r/min)
Packing Dimension (MM)
Net weight (Kg)
Noise (dB)
CONCRETE MIXER MIX125
125
100
585
Counter-clockwise
250
24
230
0.55
2,3
4,7
1350-1400
860x680x650
55
< 80
15