Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
C831 - Installing Additional RAM
Install additional RAM to increase the memory
capacity of your printer in cases such as if
occur. Your printer supports 256 MB and 512 MB
RAM.
Note
Use only genuine Oki Data products. The performance
cannot be guaranteed when using other products.
The static electricity may damage parts. Discharge the
static electricity from your body by touching grounded
metallic parts, etc., before work.
Memo
For banner printing, installing additional memory is
recommended.
1
Turn off your printer, and then unplug
the AC cord and Ethernet or USB cable.
Reference
"Turning Off the Power" P.22
2
Open the access cover (1) on the right
side of a printer.
3
Slide the metal plate (2) upward to
remove.
Note
If the SD memory card socket is attached, remove
the SD memory card.
(1)
metal plate (2), and slide it upward.
1
2
ENGLISH - 1
(2)
Pinch the lower part of the metal
plate (2), and pull it forward.
4
Make sure the LED (3) indicated by the
arrow turns off. If it is lit, wait until it
turns off.
5
Insert the additional RAM (4) into the
printer.
Note
Be sure to check a direction of an additional RAM.
The additional RAM has small dents on its connector,
6
Install the metal plate (2).
(1)
First, insert the upper part of the
metal plate (2) in the printer, then
install the metal plate.
2
3
4
2
Publicidad
Manuales relacionados para Oki C831
Resumen de contenidos para Oki C831
- Página 1 Your printer supports 256 MB and 512 MB RAM. Note Use only genuine Oki Data products. The performance cannot be guaranteed when using other products. Make sure the LED (3) indicated by the The static electricity may damage parts. Discharge the arrow turns off.
- Página 2 While holding the lower part of the Press the scroll button several times metal plate (2), slide the metal plate to select [System] and press the downward and secure it. <ENTER> button. Press the scroll button several times to select [Total Memory] and press the <ENTER>...
- Página 3 L'imprimante prend en charge 256 et 512 Mo de RAM. Remarque Utilisez uniquement des produits pour données de marque Oki Data. Les performances ne sont pas garanties en cas d'utilisation d'autres produits. Assurez-vous que la DEL (3) indiquée L'électricité statique peut endommager des pièces.
- Página 4 Tout en maintenant la partie Appuyez plusieurs fois sur le bouton inférieure de la plaque métallique pour sélectionner (2), faites-la glisser vers le bas et [Système (System)], puis sur le bouton <ENTER (ENTRÉE)>. Appuyez plusieurs fois sur le bouton pour sélectionner [Mémoire totale (Total Memory)], puis sur le bouton <ENTER (ENTRÉE)>.
-
Página 5: C831 - Instalación De Ram Adicional
C831 - Instalación de RAM adicional Tome la parte inferior de la placa de metal (2) y tire de ella hacia Instale RAM adicional para aumentar la adelante. capacidad de memoria de la impresora si hay un desbordamiento de memoria o se producen errores de impresión intercalada. - Página 6 Mientras sujeta la parte inferior de Pulse el botón de desplazamiento la placa de metal (2), deslícela hacia varias veces para seleccionar [Memoria total (Total Memory)] y pulse abajo y fíjela. el botón <ENTER (INTRO)>. Compruebe que el valor de [Memoria total (Total Memory)] ha aumentado.
- Página 7 A impressora suporta RAM de 256 MB e 512 MB. Nota Utilize apenas produtos Oki Data genuínos. Não é possível garantir o desempenho da impressora se utilizar outros produtos. se apaga. Se estiver aceso, aguarde que começar a trabalhar, descarregue a electricidade estática...
- Página 8 Se o valor de [Total de Memória] não tiver aumentado, como o cabo Ethernet ou USB e volte a instalar a RAM adicional. Prima o botão <ON LINE (ONLINE)>. e prima o botão <ENTER (INTRODUZIR)>. ©2013 OKI Data Americas, Inc. All rights reserved. 59416401 PORTUGUÊS - 8...