Publicidad
Idiomas disponibles
Idiomas disponibles
While holding the lower part of the
(2)
metal plate (2), slide the metal plate
downward and secure it.
Note
Attach the SD memory card socket before installing
the metal plate if the SD memory card socket was
attached to the printer.
7
Close the access cover (1).
8
Plug the AC cord and Ethernet or USB
cable into your printer, and then turn on
the power switch.
9
Press the <ENTER> button on the
operator panel.
10
Check that [
and press the <ENTER> button.
2
12
13
1
14
] is selected
ENGLISH - 2
11
Press the scroll button
to select [System] and press the
<ENTER> button.
Press the scroll button
to select [Total Memory] and press the
<ENTER> button.
Check that the value of [Total Memory]
has increased.
- For memory expanded to 256 MB, it is
[512 MB]; for memory expanded to 512
MB, it is [768 MB].
Note
If the value of [Total Memory] has not increased, turn
off your printer and unplug the AC cord and Ethernet or
USB cable, and then reinstall the additional RAM.
Press the <ON LINE> button.
several times
several times
Publicidad
