Bluetooth ® Mode; Incoming Calls - 3M WORKTUNES Manual Del Usuario

Bluetooth Mode
®
1. Pair the Device Function
Press Source button to activate
the Function button for two seconds until you hear, "Bluetooth Pairing
On". On your device, connect to "Worktunes Wireless" using Bluetooth®.
You will hear "Bluetooth Connected" when your device is paired
successfully. Set the device volume to its maximum level and use the
On/Off/Volume knob to control the volume of the hearing protector.
WorkTunes Connect + AM/FM
TM
Hearing Protector Bluetooth® Range
The typical range between a Bluetooth® device and the WorkTunes
Connect + AM/FM Hearing Protector is approximately 25 feet.
This distance may vary depending on the device. As the distance between
the Bluetooth® device and the hearing protector is increased, the risk of
signal dropouts will also increase.
For best results, keep your Bluetooth® device on your body or within
arm s length of the WorkTunes
'
Bluetooth® mode.
10
Bluetooth® Mode allows you to connect
hearing protector to your Bluetooth® Device.
Bluetooth® Mode. Next, press and hold
hearing protector while using
TM
2. Forward/Back or Pause/Play
Turn the Tuning Dial to scroll forward or backward.
Press the Tuning Dial in to pause/play.

Incoming Calls

Once paired, incoming phone calls will cause the music to
be muted (regardless of the input mode selected) and you
TM
will hear your phone s ringtone.
'
To answer an incoming call, press the center of the Tuning
Dial once. To disconnect from a call, press the Tuning Dial
once more. After disconnecting from the call you will hear
"Call Terminated. " To reject a call and return to Bluetooth®
audio, press and hold the center of the Tuning Dial. After
rejecting a call you will hear "Call Terminated. "