Brandt BOP7542X Instrucciones Para El Usuario página 49

Installing your device
CHOICE OF LOCATION AND FITTING
The diagrams determine the dimensions of a
piece of furniture that will accommodate your
oven. This device can be installed either in
column (A) or under plan (B). If the cabinet
is open, its opening must be 70 mm maximum
at the back (C and D). Secure the oven in the
cabinet. To do this, remove the rubber stops
and pre-drill a Ø 2 mm hole in the wall of the
furniture to prevent the wood from splintering.
Secure the oven with the 2 screws.
Replace the rubber stops.
8
A
545
560
Tip
To be certain that you have properly ins-
talled your appliance, do not hesitate to call
on a household appliance specialist.
Warning :
If the electrical installation in your residence
requires any changes in order to hook up
your appliance, contact a professional elec-
trician.If the oven malfunctions in any way,
unplug the appliance or remove the fuse cor-
responding to the sector where the oven is
hooked up.
20
50
558
585
583
544
592