Active Display - Canon IXUS 310 HS Guía De Inicio

Switching to Shooting mode
Pressing the shutter button halfway while in Playback mode switches the camera
to Shooting mode.

Active Display

When an image is displayed, lightly tapping the camera as shown below will
switch to the next image.
• Be sure to put the strap around your wrist, and hold the camera firmly to
avoid dropping it.
• Depending on the way you tap the camera, images may not switch.
Switch to next image
Tilt the camera to switch images
While dragging an image, if you touch and hold q or r the image will
appear coarse.
Pressing the 1 button again while the
lens is retracted will turn off the power.
If you touch and hold q on the left of the screen and tilt
the camera as shown while switching through images
(p. 22), the images advance quickly. Tilt the camera in
the opposite direction while holding r.
Active Display
Switch to previous image
23