Manual Selection; Listening To The Radio - Teac LPR550USB Manual Del Usuario

1
Select FM or AM using the FM/AM button.
2
Select the station you want to listen to.
Auto selection
Hold down the TUNING button (
display begins to change .
< When a station is tuned in, the tuning process will stop
automatically .
< Press the TUNING button (

Manual selection

(Selecting stations which cannot be tuned automatically)
When the TUNING button (
frequency changes by a fixed step .
Press the TUNING button (
you want to listen to is found .
14

Listening to the Radio

or ) until the frequency
or ) to stop the auto selection .
or ) is pressed momentarily, the
or ) repeatedly until the station
FM MODE
FM MODE button
Pressing this button alternates between STEREO mode and
MONO mode .
STEREO
FM stereo broadcasts are received in stereo and the "STEREO"
indicator lights in the display .
< If the sound is distorted and the "STEREO" indicator blinks, the
signal is not strong enough for good stereo reception . In this
case, change to MONO mode .
MONO
To compensate for weak FM stereo reception, select this mode .
Reception will now be forced to monaural, reducing unwanted
noise .
If the reception is poor
AM broadcast
Change the position and direction of the AM antenna and/or the
unit to find the best position for AM stations .
FM broadcast
Extend and turn around the FM antenna so that you can receive
the stations clearly .
< If the reception was not improved, an outdoor antenna may be
required .