Detail Window - Electric Fence Energiser; Detail Window - Fence Sensor - VOSS.farming FM10 Instrucciones De Operación

6.3

DETAIL WINDOW - ELECTRIC FENCE ENERGISER

h - Name and type of the electric fence
energiser
Info
The name of the device (above)
can be changed by the user.
The type of the device (below)
cannot be changed by the user.
i - Status and power level of the
electric fence energiser
See point c in Section 6.2.
ƒ
j - Signal strength between the Fence
Manager and the electric fence
energiser
k - Fence voltage value [kV]
l - Specified voltage limit value for
triggering the alarm [kV]
m - Battery status of the electric fence energiser, if connected [V]
n - Time since last data transmission
6.4

DETAIL WINDOW - FENCE SENSOR

h - Name and type of the fence sensor
Info
The name of the device (above)
can be changed by the user.
The type of the device (below)
cannot be changed by the user.
p - Signal strength between the Fence
Manager and the Fence Sensor
q - Fence voltage value at the respective
point on the fence [kV]
r - Specified voltage limit value for
triggering the alarm [kV]
s - Battery status of the Fence
Monitor [%]
t - Time since last data transmission
36
INSTRUCTION MANUAL VOSS.FARMING FENCE MANAGER FM10
41650 | 12 | 2020 | V2