Switching The Device On And Off; Menu And Settings; Pairing - VOSS.farming FM10 Instrucciones De Operación

INSTRUCTION MANUAL VOSS.FARMING FENCE MANAGER FM10
7.3

SWITCHING THE DEVICE ON AND OFF

1. Connect the included mains adapter to the connector (5) on the device
2. Insert the plug of the mains adapter into a socket that corresponds to the
requirements of the device.
NOTICE
Malfunctions may occur if the device is operated without mains power and
using a deeply discharged backup battery. ECO mode is activated if the power
supply is insufficient (see Section 8.4). Only switch on the device once it has been
connected to the power supply.
3. Press and hold the Exit button on the touch control panel (3) for more than one
second to switch the device on.
4. Press and hold the Exit button on the touch control panel (3) again for more than
one second to switch the device off.
8

MENU AND SETTINGS

The main menu includes:

Pairing

ƒ
Sound
ƒ
Display
ƒ
Advanced
ƒ
About
ƒ
1. Press and hold the Menu button for more than one
second within the overview window or the detail window
to open the menu.
2. Use the arrow buttons to switch between the five menu
items.
3. Briefly press the Enter button to open one of the menu items.
4. Press the Exit button to leave the menu.
8.1 PAIRING
The submenu allows you to:
Pairing
ऀ Pair new devices with the Fence Manager (see Section 9.1 and Section 9.2)
ऀ Add paired Fence Sensors as subordinate nodes (see Section 9.3)
ऀ Assign new names to devices (see Section 9.4)
ऀ Remove paired devices (see Section 9.5)
41650 | 12 | 2020 | V2
DE
EN
EN
FR
IT
NL
SV
ES
PL
39