Clearing Values From Memory; Important Notes Regarding Your Blood Pressure Measurement - HoMedics BPA-050 Manual De Instrucciones

CLEARING VALUES FROM MEMORY

1. Press the User-Select button to select
User 1 or User 2.
2. Continue to press
the "MEM" button for
approximately 5 seconds,
then the data for the
selected user will be
erased automatically.
Note: The data stored in memory for both users may
be erased if any of the batteries are removed.
(Users should first record the data in a Blood
Pressure log before replacing or removing batter-
ies or power source.)
IMPORTANT NOTES REGARDING YOUR BLOOD
PRESSURE MEASUREMENT
• Take your reading in a comfortable environment as
measurements can be affected by hot or cold
temperatures. Take your blood pressure at
normal body temperature.
• Do not move or talk during measurement as this
can elevate readings.
MEM
MEM
START
STOP
23
• Do not move or cross legs during measurement.
Keep feet flat on floor.
• Do not touch cuff or monitor during
measurement procedure.
• It is suggested that you take your measurements
START
STOP
at the same time each day and use the same arm
for consistency.
• Users should wait a minimum of 5 minutes before
taking additional measurements. More time may
be necessary depending upon your physiology.
• The measurement results that users receive
are for reference only. If users have any blood
pressure concerns, please consult a physician.
• Once inflation reaches 300 mmHg, the unit will
deflate automatically for safety reasons.
• This product is not suitable for people with
arrhythmias.
• This device may have difficulty determining the
proper blood pressure for users with diabetes,
poor circulation of blood, kidney problems, or
for users who have suffered a stroke.
24