Date & Time Set Procedure; Applying The Cuff - HoMedics BPA-050 Manual De Instrucciones

DATE & TIME SET PROCEDURE
1.To adjust the date/time, press the Set button
located next to the LCD display. The unit will
show a blinking number showing the month.
2.Change the month by pressing the
press will increase the number by one in a cycling
manner. Press the Set button
entry, and the screen will show a blinking number
representing the day of the month.
3.Change the date and time as described in Step 2
above, using the button to change the numbers
and the Set button
4. A "0" will reappear as the blood pressure monitor is
ready for measurement again.
repeat process to set date and time
button. Each
again to confirm the
to confirm the entries.
Press the button
blinking month
increasing month
confirm the entry
13

APPLYING THE CUFF

,
1. If the cuff is not assembled, pass the end of the
cuff furthest away from the tubing through the
metal D-ring in order to form a loop.
End of cuff
D-ring
2. Plug the cuff tube into the left side of the unit.
Insert plug here
14