Panasonic DC-ZS200 Guía Rápida

ENGLISH
Digital Camera
Model No.
DVQW1335ZA
Quick Guide for 4K Photo
Catching the moment you really want ([4K Burst] / [4K Burst(S/S)] / [4K Pre-Burst])
You can take burst pictures of approximately 8 million pixels with a burst rate of 30 fps. You can select and save a frame from the burst file.
1
Recording with the 4K Photo function
1 Press [ ] button
2 Press to select the recording method and press [MENU/SET]
For capturing the best shot of a fast-moving subject (e.g., sports, aeroplanes, trains)
[4K Burst]
Burst recording is performed while the shutter button is pressed and held. The shutter sound
will be heard repeatedly.
1 Press the shutter button halfway
2 Press and hold the shutter button fully for as long as you want to
perform recording
●
Recording will start approximately 0.5 seconds after you press the shutter button fully. Therefore, press
the button fully slightly in advance.
For capturing unpredictable photo opportunities (e.g., plants, animals, children)
[4K Burst(S/S)]
Burst recording starts when the shutter button is pressed and stops when pressed again.
Start and stop tones will be heard. "S/S" is an abbreviation of "Start/Stop".
1 Press the shutter button fully
2 Press the shutter button fully again
●
When you press the [Fn1] button while recording, you can add a marker.
When selecting and saving pictures from a 4K burst file, you can skip to the positions where you added
markers.
For recording as needed whenever a photo opportunity arises (e.g., the moment when a
ball is thrown)
[4K Pre-Burst]
Burst recording is performed for approximately 1 second before and after the moment that the
shutter button is pressed. The shutter sound will be heard only once.
1
Press the shutter button fully
●
In situations where you want to lock focus and exposure, such as when the subject is not at the
center, use [AF/AE Lock].
■
To cancel the 4K Photo functions: In step 2 , select [ ] .
●
Burst pictures are saved as a single 4K burst file in the MP4 format.
●
Use a UHS Speed Class 3 card.
●
When recording, the angle of view becomes narrower.
●
If you are using Auto Focus, continuous AF will work while recording. Focus will be adjusted continuously.
●
You can reduce the blur of the subject by setting a faster shutter speed. Approximate shutter speed for outdoor recording in fine weather conditions: 1/1000 seconds or faster.
●
Recording stops when the continuous recording time exceeds 15 minutes. When using an SDHC memory card, files are split into smaller picture files for recording and playback
if the file size exceeds 4 GB. (You can continue to record pictures without interruption.) If using an SDXC memory card, you can record pictures in a single file even if the size is
greater than 4 GB.
●
If the surrounding temperature is high or 4K photos are recorded continuously, [
down.
●
When [ ] ([4K Pre-Burst]) is set, the battery drains faster and the camera temperature rises. (to protect itself, the camera may switch to [
Select [ ] ([4K Pre-Burst]) only when recording.
DC-ZS200
[
] may be displayed and recording may be stopped halfway through. Wait until the camera cools
] ([4K Burst]))
2
Selecting pictures from 4K burst file and saving
Markers have been set by the camera automatically on a scene in which a face or the movement of a subject is detected during recording, for example, at the scene when a vehicle
passes by or a person turns around. (Auto Marking)
1
Select a picture with the [
●
In the case of recording with [
2 Drag the slide bar to perform rough scene selection
●
You can skip to a marked position by touching the marker.
White marker: Manually set marker / Green marker: Marker set by the camera automatically
3 Drag to select the frame you want to save as a picture
4 Touch [ ] to save the picture
●
The selected picture will be saved as a new picture in the JPEG format separate from the 4K burst file.
] button Shutter button
Showing movement by combining a sequence of pictures ([Sequence Composition])
1 Select [Sequence Composition] from the [Playback] menu
2 Use to select the 4K burst files and press [MENU/SET]
3 Select frames to combine (from 3 to 40 frames)
4
Press to select [Save], and then press [MENU/SET]
5 Select [Yes] at the confirmation screen and press [MENU/SET]
Press and hold
Adjusting the focus after recording ([Post Focus] / [Focus Stacking])
Recording is performed
You can record 4K burst pictures while changing the focus point and then select a focus point after recording.
Recording using [Post Focus]
●
We recommend using a tripod to perform [Focus Stacking].
1
Press [ ] button
2 Press to select [ON] and press [MENU/SET]
Start (First)
3 Determine the composition and press the shutter button halfway
Stop (Second)
●
Do not change the composition or the distance to subject before completion of recording.
Recording is performed
4 Press the shutter button fully to start recording
●
When the recording progress bar disappears, recording automatically ends.
■
To cancel [Post Focus]: Select [OFF] in step
Selecting a focus point ([Post Focus])
Approximately 1 second
Recording is performed
1 On the playback screen, select the
image with the [
2 Touch the focus point
●
If there are no pictures with the focus on the
selected point, a red frame will be displayed, and
pictures cannot be saved.
●
To enlarge the display, touch [
You can make fine adjustments to the focus by
dragging the slide bar during enlarged display.
3 Touch [ ] to save the picture
●
The selected picture will be saved as a new
separate file in the JPEG format.
] on the playback screen, and press
3
] ([4K Pre-Burst]), proceed to the step .
2
.
Increasing the focus range ([Focus Stacking])
1
Touch [
([Post Focus])"
2
Choose a stacking method and touch it
] icon and press
[Auto Merging] / [Range Merging]
3
(When selecting [Range Merging])
Touch the focus point
●
Select positions at two or more points.
●
Focus points between the selected two positions
will be selected.
●
Positions that cannot be selected, or that would
].
produce an unnatural result will be grayed out.
●
Touch a position again to deselect it.
4
Touch [
●
The picture will be saved in JPEG format.
] on screen in step 2 of "Selecting a focus point
Set/Cancel Set/Cancel
Reset Reset
] to combine and save the picture