Oki MICROLINE 8810 Guia De Instalacion página 4

Warning!
Make sure the printer is turned off before you
open the cover.
3. Open the cover.
4. Verify that the printhead is centered (at the
"Ribbon set position").
F2_07a.jpg
5. Unpack the ribbon cartridge and remove the lock
F2_03_open_c
over.jpg
6. Swing out the ribbon arms on either end of the
7. Tilt the display panel toward you.
4
pieces (1).
cartridge until they snap into place.
F2_09.jpg
F2_10a.jpg
F2_04_Tilt_Display.J
PG