Publicidad
Idiomas disponibles
Idiomas disponibles
attaCh SkiLift to
univerSaL mount
• Use button head screw.
• Tighten with hex wrench.
CLoSe CarrierS with
firm preSSure
install SkS locks according
to lock instructions
• Locks are purchased separately.
• CLOSE YOUR CARRIERS
BEFORE LOCKING THEM
verify the CLoSure after every inStaLLation and before driving away.
Warning: Be Sure aLL HarDWare iS SecureD accorDing to inStructionS. attacHment
HarDWare can LooSen oVer time. cHecK BeFore eacH uSe, anD tigHten iF neceSSarY.
MAINTENANCE: Use non-water soluble lubricant on screws. Use
a soft cloth with water and mild detergent to clean plastic parts.
REMOVE RACKS AND CARRIERS BEFORE ENTERING AN
This product is covered by YAKIMA's "Love It Till You Leave It"
Limited Lifetime Warranty To obtain a copy of this warranty,
go online to www.yakima.com or email us at
yakwarranty@yakima.com or call (888) 925-4621
1033382C-5/15
• Attach hex bolt and hex key, then
tighten.
• Loosen any bail screws to reposition
mounting brackets for better fit.
if you remove carriers, follow instructions to reinstall.
AUTOMATIC CAR WASH.
K E E P
T H E S E
attaCh SkiLift
to Carrier
verify the CLoSure!
• Pull upward on upper section of
carrier to see if the carrier can
open.
• If it opens, apply more pressure
when closing the carrier.
rear hatCh
ALWAYS USE CAUTION
WHEN OPENING
YOUR HATCH.
I N S T R U C T I O N S !
tighten front
baSe SCrewS
Tighten any loose bail screws
to secure the brackets to the
crossbars.
to extend the life of your product,
remove the carrier and clean
at the end of the season
TECHNICAL ASSISTANCE
OR REPLACEMENT PARTS
Contact your dealer or call
(888)925-4621
Monday through Friday,
7:00 AM to 5:00 PM, PST
Publicidad
