Beyerdynamic AVENTHO WIRELESS Manual De Instrucciones página 15

Aventho wireless – Headphones
Reset to factory settings
• Switch on the Aventho wireless.
Then perform the following steps within two seconds:
– Hold button
– Drag one finger backwards on the touch pad
– Release button
Touch pad and button functions table
Unless otherwise stated, the listed functions apply for headphones that are switched
on.
Switch on
Switch off
Paring mode
Delete pairing mode list
Start / pause
Increase volume
Decrease volume
Next track
Previous track
Scroll forward
Scroll backward
Accept / finish a call
Reject a call
Toggle between 2 callers
.
.
.
Press button for 2 seconds
Press button for 6 seconds
Switch off headphones, then press
button for 6 seconds
Switch off headphones, then press
button for at least 10 seconds
Briefly tap the touch pad
Drag your finger upwards on the touch
pad
Drag your finger downwards on the touch
pad
Drag forwards on the touch pad
Drag backwards on the touch pad
Drag forwards on the touch pad
hold for at least 1 second
Drag backwards on the touch pad
and hold for at least 1 second
Briefly tap the touch pad
Press the touch pad
Press the touch pad
15
twice
.
. and
.
twice
for 2 seconds
for 2 seconds