Playing A Dvd-Vr Disc; Starting Procedure; Reading The Screen - Pioneer T1000-25815 Manual De Instrucciones

Chapter
07

Playing a DVD-VR disc

p This function is only available on AVIC-F10BT
(including AVIC-F10BT with software up-
grades).
You can play a DVD-VR (DVD Video Recording
Format) disc using the built-in drive of the na-
vigation system. This section describes opera-
tions for DVD-VR discs.

Starting procedure

1 Press the MODE button to display the
AV operation screen.
2 Insert the disc you want to play into
the disc-loading slot.
The source changes and then playback will
start.
p If the disc is already set, tap [Disc] on the
left edge of the screen.
3 Use the touch panel keys on the screen
to control the disc.
= For details, refer to Using the touch panel
keys on page 29.
28
Engb

Reading the screen

1 2 3 4
c
1 Title number indicator
Shows the title number currently playing.
2 Audio track indicator
Shows the audio track number currently se-
lected.
3 Chapter number indicator
Shows the chapter number currently playing.
4 Audio channel indicator
Shows the current audio channel type, such
as "Mch" (Multi-channel).
5 Play mode indicator
Shows the current play mode.
= For details, refer to Switching the play-
back mode on page 31.
6 NEWS indicator
Shows the status of news programmes.
7 TRFC indicator
Shows the status of traffic announcements.
8 Mixing condition indicator
Shows the current mixing condition.
= For details, refer to Selects audio out-
put on page 32.
9 Current time
a Digital sound format indicator
Shows which digital sound format (surround
sound format) has been selected.
b Play time indicator
Shows the elapsed playing time within the
current title.
c Source icon
Shows which source has been selected.
5 6 7 8 9
a
b