Yakima BuckHorn 4 Elite Manual De Instrucciones página 3

INseRT TONGue
INTO vehIcle's
hITch.
IF SPARE
TIRE CAUSES
INTERFERENCE,
DO NOT USE
THIS PRODUCT!
Align the holes in the
receiver to the holes
in the base.
ATTACH ARMS TO MAST.
Attach lock-washers and bolts.
Tighten bolts with 9/16" wrench.
1033606B-3/15
INsTAll lARGe bOlT,
lOck-WAsheR, ANd
WAsheR.
Install bolt, lock-washer,
and washer from right side
of receiver.
TIGHTEN with adjustable wrench.
Attach one rubber strap to each
cradle and stabilizer.
INsTAll hITchlOck OR
OPTIONAl sAfeTy PIN.
• Attach hitch lock.
• Insert the key and
lock the lock.
• close the cap.
If you choose
not to use the
Hitchlock you
MUST install the
safety pin.
Insert coupling nuts into back of mast.
stabilizer
carrier arms, close cradle and
stabilizer. Close cradles while
NOTE:
To slide cradles along the
loading bikes.