Titan HYDRA X 4540 Instrucciones De Uso página 2

ORIGINAL OPERATING MANUAL
Attention: Danger of injury by injection!
Airless units develop extremely high spraying pressures.
1
Never put your fingers, hands or any other parts of the body into
the spray jet!
Never point the spray gun at yourself, other persons or animals.
Never use the spray gun without safety guard.
Do not treat a spraying injury as a harmless cut. In case of injury
to the skin through coating materials or solvents, consult a doctor
immediately for quick and expert treatment. Inform the doctor
about the coating material or solvent used.
2
The operating instructions state that the following points must
always be observed before starting up:
1.
2.
3.
4.
5.
3
The instructions regarding regular cleaning and maintenance of
the unit must be strictly observed.
Before any work is done on the unit or for every break in work the
following rules must be observed:
1.
2.
3.
Be safety conscious!
2
Warning!
Faulty units must not be used.
Secure spray gun using the trigger lock on the trigger.
Ensure that the unit is properly earthed.
Check allowable operating pressure of high-pressure hose and spray gun.
Check all connections for leaks.
Release the pressure from spray gun and hose.
Secure the spray gun using the trigger lock on the trigger.
Switch off unit.
HYDRA X