I Dc And Ac Currents (A Et Ma) - Chauvin Arnoux C.A 5220G Manual De Empleo

FREQUENCIES
(extension to 10 000 counts)
Hz
100 Hz
Resolution 0.01 Hz
Accuracy
Permitted overload
Operating range
(1) The RANGE button on this function selects the trigger level :
10mV, 100mV or 1V (10mV is selected when the instrument is
switched on).
DC and AC CURRENTS
Always switch Off the circuit to be tested before connecting
the multimeter to the circuit
I Warning : connect the leads to the multimeter and connect in series to the
circuit
- the red lead to the + terminal up to 400mA
- the red lead to the 10A terminal , from 400mA to 10A
I Place the selector switch to the A or mA ammeter function.
Press the DC/AC button to select DC or AC.
I Switch On the circuit to be tested so that it is live
I Automatic range selection : read the measured value
I If necessary, press the following buttons
- RANGE to manually select the ranges
- MIN.MAX to read the min or max values
- to light the display
1 kHz 10 kHz 100 kHz 200 kHz
0.1 Hz 1 Hz 10 Hz
± 0.1 % reading ± 2 counts
600 V rms and 900 V peak
4 V to 600 V
23
100 Hz