OPERATING INSTRUCTIONS
•
Before using your appliance for the first time, check if it is clean (see
"maintenance and cleaning") as it comes into direct contact with
bread. Check if any object has fallen into the slots.
•
Unwind the power cable to the required length and plug it in.
•
Place the bread slices in the slots (for the French bread, cut a loaf
shorter than the slots, then cut it in two pieces along its length.).
Your appliance is provided to receive French bread, but also
pieces of toast or other bread slices if their thickness and their
length are shorter than the slots. The maximum thickness allowed for
bread is 30 mm / 1 ¼".
•
Use the browning control knob to set the required toasting level
between 1 and 6. For a medium, golden brown select level 3.
•
Press the push-down lever down until it engages, the grid inside the
slots will tighten around the bread to keep it away from the heating
wires. (If the handle comes up immediately, check if the appliance
is plugged in, as the bread carriage cannot be locked if the toaster
is not plugged in.)
•
Note: the bread carriage handle will not stay down if the appliance
is not plugged in!
•
The LED on the cancel button will light up, which means that the
heating process has begun.
•
During operation, if you think that the bread is toasted enough or
you may wish to stop the heating process, simply press the Cancel
button. Never lift the push-down lever to cancel toasting.
•
Toasting ends when the food inside the toaster raises up. The LED
cancel button light will go out.
BAGEL FUNCTION
•
Place a half bagel in each toasting slot with the cut sides facing the
center.
•
Set the toasting level to desired setting and press the lever down.
•
Select the Bagel button and the Bagel LED indicator light will light
up.
•
Once toasting is complete, the bagel will automatically rise.
www.KALORIK.com
7
BR TO 46527 MT- 200605