Changing Of The Root Canal Instruments; Test Run - Coltene CanalPro Jeni Instrucciones De Utilizacion

CanalPro Jeni

Changing of the root canal instruments

Root canal instruments
 Please make sure to solely use root canal instruments in perfect technical condition.
 Please observe the manufacturer's instructions.
 Please insert the root canal instrument only when the contra-angle is at stillstand.
 Don't ever touch the root canal instrument when it is still rotating or running out.
 Don't ever press the press button on the contra-angle while the contra-angle is still
rotating or running out. This may result in the root canal instrument loosening, or
the press button getting hot.
 Please make sure to always use a rubber dam.
1. Insert the instrument until the stop position is reached (a)
and turn it until it locks in place b).
2. Check if the instrument is safely locked in place by pulling it in axial direction (b).
3. To remove the instrument, press the press button.

Test run

1. Insert the root canal instrument.
2. Start the contra-angle.
3. In case of functional disorder (for example vibrations, unusual noise, heating),
please make sure to put the contra-angle out of operation immediately and contact
the manufacturer (see chapter 11)
18