Name Of Each Part - Coltene CanalPro CL Instrucciones Para El Uso

(1) Symbols
This conforms to CE European Directive of "Medical equipment directive 93/42/EEC. "
TUV Rhineland of North America is a Nationally Recognized Testing Laboratory (NRTL) in the United
States and is accredited by the Standards Council of Canada to certify electro-medical products
with Canadian National Standards.
Follow the waste of electric and electronic equipment (WEEE) Directive (2002/96/CE) to dispose of
the product and accessories.
Class II equipment
Refer to the Operation Manual.
1. Features
- Ergonomic design and compact body.
- "6 position type head" allows direction of contra angle head to be changed and the ON/OFF key to be set
to a position where it can be easily activated.
- The larger ON/OFF key enhances operability (compared with conventional products).
- Operates continuously for approx. 1.2 hour at rated load. (Dependent upon use conditions.)
- The liquid crystal panel enhances user friendliness.
- Memory for up to 5 programs .
- The auto reverse function is activated depending on the load. A wide variety of functions such as "AUTO
REVERSE", "AUTO STOP" and "AUTO REVERSE OFF" are available. The memory can store these functions
combined with nine different operation programs.
- The motor handpiece can be turned on and off by pressing the ON/OFF key. Alternatively the unit can be
operated by holding down the ON/OFF key during operation and letting go of the ON/OFF key to stop
the handpiece.
- The motor handpiece softly starts. Since the rotation briefly stops before changing direction there are no
vibrations and shocks during the change of directions.
- Energy saving. The power of the motor handpiece automatically turns off when there are no operations
for 10 minutes. (Auto power-off function)
- The feedback circuit, which keeps rotation at a constant speed even when the load on the motor hand-
piece changes, is built in.
- Non-contact charger prevents improper charging due to deterioration of metallic terminal.
- In spite of non-contact charging, this has realized rapid charging, shortening the time for charging.
- The contra angle heads provided for this product are all autoclavable at 135ºC (excluding the motor
handpiece).
34
Type B conforming component
Manufacturer
2. Specification
Battery Charger
Input Voltage AC120/240V±10% 50/60Hz
Input Power 15VA
Charging Time Approx. 90 min.
Motor Handpiece
Input Voltage DC2.4V±20%
Input Power 0.3VA
Use environment
Temperature 10 - 40 ˚C
Humidity 10 - 75 %
(Non condensing)
Atmospheric pressure 700-1060 hPa
Store environment
Temperature -10 - 50 ˚C
Humidity 10 - 80 %
(Non condensing)
Atmospheric pressure 500-1060 hPa

3. Name of each part

Motor Handpiece
Contra Angle Handpiece
Battery charger
Power cord
F-type spray nozzle Motor cap
35