Intended Use; Safety Advice - BGS technic 9458 Manual De Instrucciones

Engine Timing Tool Set for BMW S65
TOOLS
1 4x Mounting Screw (Camshaft Adjusting Tool)
2 Crankshaft Locking Tool, to be used as OEM 11 5 320
3 VANOS Adjusting Tool, to be used as OEM 11 5 370
4 Chain Tensioner Locking Tool, to be used as OEM 11 5 290
5 Camshaft Adjusting Tool (Inlet), to be used as OEM 11 9 971
6 Camshaft Adjusting Tool (Exhaust), to be used as OEM 11 9 972
7 2x Mounting Screw (Camshaft Adjusting Tool)

INTENDED USE

This tool set includes above listed tools for setting the engine timing on BMW S65 engines.
Further information regarding the item and a list of suitable motors and models can be found on our
website: www.bgstechnic.com

SAFETY ADVICE

•
Do not use the set if any parts are missing or damaged.
•
Only use this tool for the purpose for which it is intended.
•
Never lay tools on the vehicle's battery. This may short the terminals together.
•
Be careful when working on running engines. Loose clothes, tools and other things can be
caught up in revolving parts which may lead to serious injuries.
•
Keep children and other unauthorised persons away from the working area.
•
Be careful when working on hot engines – risk of burn!
•
Remove the negative battery connection before repairing, so you avoid short circuits and that the
engine will not start unintentionally.
•
This manual is just brief information and will not replace a garage handbook.
•
Always consult specific service literature for information about torques, assemblies and
disassemblies etc.
•
After any successful maintenance and before starting the engine, you should rotate the engine
for two turns manually to check the new control time.
•
Turn the crankshaft in the normal direction (clockwise unless stated otherwise) and only at the
crankshaft itself, never turn the crankshaft by turning camshaft or another wheel.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Art. 9458
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed