System Settings; Call Barring - Doro MoveEasy 316 Manual Del Usuario

System settings

System PIN is 0000 on delivery.
1. Press Menu. Scroll to Base Set. Press OK.
2. Scroll to desired function e.g. Ringer Set. Press OK.
3. Scroll to required setting. Press OK.
Ringer Set
Ringer Priority You can decide whether all handsets should ring at once
Care dial

Call barring

Net. Provider
Dial Set
Date/Time
Deregister
Base PIN
Default Set
English
The ring signal of the base can be adjusted.
when there is an incoming call, or if one handset should
start ringing before the others. You can set the number of
ring signals for this function as well.
The CARE memory is used to store e.g. a security number.
The call will be connected via the speaker function by
pressing the line key for about a second.
Different types of outgoing calls are blocked, see separate
description.
Settings to use different service providers, see separate
description.
Settings for advanced installations, see separate
description.
Setting of date/time is described in Connection.
To deregister a handset from a base unit.
You can change the pin code (0000 on delivery).
Reset base unit.