Net. Provider; Network Services - Doro MoveEasy 316 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Net. Provider

To choose a certain service provider, one would usually dial a prefix code
before the actual phone number.
This function will automatically select the telephone network provider, e.g.:
Provider X (prefix 9301) for dialling international calls. Set up the LCR so that
all phone numbers starting with 00 will be changed to 930100. System PIN is
0000 on delivery.
1. Access Net. Provider according to description on previous page.
2. Scroll to the required preselection. Press OK.
3. Enter sequence to be sensed/exchanged (up to 5 digits, e.g. 00).
4. Scroll to <Number>. Enter sequence to be
added (up to 10 digits, e.g. 930100).
5. Scroll to required setting Off/On. Press OK.
Please note!
To place your call with a certain network provider, you must be a registered subscriber.
The display always shows the entered number (not the number actually being dialled).
You can have up to four Net Provider options simultaneously.
If the number sensing option is not selected, the digits will be added to every call.

Network services

Most usual operator/extra services can be accessed via the menu or with the
menu buttons during a call. Some functions are pre-programmed but is not
certain that all functions will work on delivery as this will depend on the
country of installation/operator. You can change the codes that are sent, see
Other Settings.
Please note!
You may have to pay extra for some services, contact your service provider for more information.
Some services will not work unless you have contacted your service provider to activate them.
Via the menu
1. Press Menu. Scroll to Net Services. Press OK.
2. Scroll to required service.
- Withhold No Withhold your number from recipient. The code
for this service must be programmed manually, see Other Settings.
- Call Divert Incoming calls are always diverted to another number.
- Call Waiting Function off/on. This is a practical function for
avoiding problems with temporary modem connections.
- Wake up Enter the time when you wish to receive
your wake up alarm call. HH:MM.
3. Press OK. Follow the instructions on the handset/display.
4. Press
to terminate call.
q
English


Publicidad

Tabla de contenido
loading

Tabla de contenido