Technical Data; Definitions: Safety Guidelines - DeWalt D28730 Traducido De Las Instrucciones Originales

CHOP SAW
D28730
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
UK & Ireland
Type
Power Input
No‑load speed
Min. peripheral speed cutting disc
Disc diameter
Disc bore
Disc body thickness
Thread size of spindle
Type of cutting disc straight, non‑recessed
Cross‑cutting capacity at 90˚
circular
square
rectangular
angular
Cross‑cutting capacity at 45˚
circular
square
rectangular
angular
Weight
Noise values and/or vibration values (triax vector sum) according to
EN62841‑3‑10:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
WALT one of the
e
D28730
QS/LX
V 230/115
AC
EC-Declaration of Conformity
V 115
AC
1 Machinery Directive
W 2300
min -1 4000
m/s 80
Chop Saw
mm 355
D28730
mm 25.4
D WALT declares that these products described under
e
mm 3.0
Technical Data are in compliance with:
M10
2006/42/EC, EN62841-1:2015, EN62841-3-10:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
mm 125
The undersigned is responsible for compilation of the technical
mm 115 x 115
file and makes this declaration on behalf of D
mm 115 x 130
mm 120 x 120
mm 115
Markus Rompel
mm 98 x 98
Vice-President Engineering, PTE-Europa
mm 95 x 105
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
mm 105 x 105
17.08.2018
kg 15.5

Definitions: Safety Guidelines

dB(A) 96.7
The definitions below describe the level of severity for each
dB(A) 107.1
signal word. Please read the manual and pay attention to
dB(A) 3
these symbols.



An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
EngLIsh
WALT at
e
WALT.
e
19