Kärcher B 300 RI LPG Manual De Instrucciones página 33

9.8.4 Clean the waste water tank
9.8.5 Clean the fresh water reservoir
2
9.8.6 Cleaning sealing lips, suction bar and spray nozzles
2
1
1
EN
1 Dirt water discharge hose
2 waste water tank
3 Signal transmitter
Switches off the suction turbine when the waste water
tank is filled
4 Lock
5 Cover waste water tank
Clean the waste water tank after completion of work.

Before cleaning, empty the waste water tank, see

Chapter "Wet cleaning | Emptying the waste water
tank".
1 Safety support
2 waste water tank
3 Dirt water discharge hose
4 Cleaning flap
Open for cleaning
For thorough cleaning, open the cleaning flap.

Use a water hose to spray out the interior of the waste

water tank.
After cleaning, check the function of the signal genera-

tor.
1 Fresh water tank
2 Fresh water tank cover
3 Filling level display
4 Drainage hose for fresh water
Flush out the fresh water tank with clear water after fin-

ishing work.
Empty residual water through the drain hose.

1 Vacuum bar
2 Suction hose
3 Seal strip
Clean suction bar and suction hose.

Clean the side sealing strips.

Clean the spray nozzles of the side scrubbing deck and

roller brush.
32
-
33