General Guidelines - Siemens XCT-8 Instrucciones De Operación

General Guidelines

WARNING:
chemical compatibility (or inertness) for general purposes. For exposure
to specific environments, check with chemical compatibility charts
before installing.
PVDF and PTFE are resistant to attack from most chemicals under the
Note:
described operating conditions. However, for exposure to specific environments,
check with chemical compatibility charts before installing the XCT-8 Transducer
in your application.
Maintenance
The XCT-8 requires no special maintenance or cleaning.
Unit Repair and Excluded Liability
All changes and repairs must be done by qualified personnel and applicable safety
regulations must be followed. Please note the following:
• The user is responsible for all changes and repairs made to the device by the user or
by the user's agent.
• All new components to be provided by Siemens Milltronics Process Instruments Inc.
• Restrict repair to faulty components only.
• Do not re-use faulty components.
Page EN-2 XCT-8 Sanitary Transducer– INSTRUCTION MANUAL
Materials of construction are chosen based on their
7ML19985HX62