Function Introduction For Combination Buttons; Child Lock Function; Light Function - Saivod SAP718 Manual Del Usuario

Introduction for Buttons on Remote Controller
Note:
● Timer setting range: 0.5~24h
● The interval between two motions can't exceed 5s, otherwise the remote con-
troller will exit setting status.

Function Introduction for Combination Buttons

Child lock function

Pressing "+" and "-" buttons simultaneously can turn on or turn off child lock function.
When child lock function is started up, LOCK indicator on remote controller is ON.
If you operate the remote controller, remote controller won't send signal.
Temperature display switchover function
Under OFF status, pressing "-" button and "MODE" button simultaneously can switch
between °C and °F.

Light function

Under switch-on or switch-off state, you may hold "+"and "FAN" buttons
simultaneously for 3 seconds to set the lamp on or off and send the code. After
being energizedthe lamp is defaulted on.
GB