Component List; Technical Data - Worx WG324 Manual Del Usuario

COMPONENT LIST

1. CHAIN GUARD
2. HOUSING-COVER KNOB
3. SECONDARY GRIP AREA
4. LOCK-OUT BUTTON
5. ON/OFF SWITCH
6. GRIP AREA
7. BATTERY PACK *
8. BATTERY PACK RELEASE BUTTON *
9. CHAIN TENSIONING TOOL
10. HAND GUARD
11. HOUSING-COVER
12. CHAIN
13. GUIDE BAR
14. CHAIN TENSIONING SCREW
15. BASE PLATE
16. BAR PAD
17. DRIVE SPROCKET
8
18. FASTENING BAR BOLT
19. BAR LOCATING TAB
20. BAR AND CHAIN SHEATH/SCABBARD
* Not all the accessories illustrated or described are
included in standard delivery.

TECHNICAL DATA

Type Designation WG324 WG324.9 (3 - designation
of machinery, representative of battery-operated
pruning saw)
Voltage
Bar length
Chain speed
Chain pitch
Number of chain
drive links
20V 5'' Chain Saw
WG324 WG324.9
20 V Max.**
5 inch (12 cm)
18.4 ft/s (5.6 m/s)
1/4 inch (6.4 mm)
32
Chain gauge
Adaptive chain type
Adaptive guide bar
type
Charging time
Weight (chain & bar
3.9 lbs (1.8 kg)
included)
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
ACCESSORIES
Chain (WA0142)
Guide bar (WA0151)
Lubrication oil
Bar and Chain Sheath/
Scabbard
Charger (WA3881)
Battery (WA3575)
Only use the appropriate accessories intended for this
tool. Accessory information can be found on the product
packaging, at a Worx dealer or on our website at www.
worx.com.
0.043 inch (1.1 mm)
1/4LP.043 32E 40MTP
WA0142
WA0151
1 hr
3.0 lbs (1.4 kg)
WG324 WG324.9
1 1
1 1
1 1
1 1
1 /
1 /
EN