mabe MMT09CABWCCCHI8 Manual Instructivo página 89

WARNING: BEFORE OBTAINING ACCESS TO THE
TERMINALS, ALL SUPPLY CIRCUITS MUST BE DIS-
CONNECTED.
Note: All the wires may be different colors. The indicators "1L" "2L" "3L"
may be "4", "5", "6" or others, and the terminal may be defferent from the
material object.
24000 to 36000 BTU/h models
For these models, the power supply should be connected from outdoor unit,
with a circuit breaker.
All the wires may be different colors.
• Defrost cable (on heat-pump air models only. It is an optional
part).
Defrost wire
(indoor)
After connection, the defrost wire should be well wrapped using a
wrapping tape, and the connector should be placed inside the
unit.
Sensor
(outdoor)
89