Tripp-Lite SMART1524ET Manual Del Propietário página 38

Operation
Set Time (#52) - Selecting this option enables setting of the UPS time. To
configure, navigate to the SET TIME screen and enter the new time. Time displays
in 24-hour format (18:00 = 6PM).
[0-MAIN MENU]
[4-SYSTEM SETTING]
[52-Set Time]
Current Time is [HOUR:MINUTE:SECOND]
Enter new value [##:##:##]
>
Change Password (#53) - Selecting this option enables the selection of a
new, user-selected 4-digit password. To configure the UPS with a new password,
navigate to the PASSWORD screen. The UPS will request a new 4-digit password
be entered. Once entered, the UPS will display SETTING AGAIN and request the
same 4-digit password be entered again for confirmation. The factory default
password is 1111. Make sure to keep track of the new password to enable future
settings and control changes.
[0-MAIN MENU]
[4-SYSTEM SETTING]
[53-Change Password]
Please Enter New Password:0000-9999
>
Reset Password (#54) – Select this option to reset the UPS back to the factory
default administrator password of 1111.
[0-MAIN MENU]
[4-SYSTEM SETTING]
[54-Reset Password]
0) No
1) Yes
>
38