Safety Precautions; Grounding Instructions - Tennant EX-SC-3840 Manual Del Operario

SAFETY PRECAUTIONS

This machine is intended for commercial use. It is
designed to clean carpet and upholstery in an indoor
environment and is not constructed for any other use.
Use only recommended cleaning solutions and
accessory tools.
All operators must read, understand and practice the
following safety precautions.
The following safety alert symbols are used throughout
this manual as indicated in their description:
WARNING: To warn of hazards or unsafe
practices which could result in severe personal
injury or death.
FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.
The following information signals potentially dangerous
conditions to the operator or equipment:
FOR SAFETY:
1. Do not operate machine:
- - Unless trained and authorized.
- - Unless operator manual is read and
understood.
- - In flammable or explosive areas.
- - With damaged cord or plug.
- - If not in proper operating condition.
- - In outdoor areas.
- - In standing water.
- - Unless cord is properly grounded.
- - With the use of additional extension cords.
Only use manufacturer's extension cord
equipped with machine which has proper
capacity and is grounded (120V models).
- - With the use of an extension cord
(220V/230V/240V models).
2. Before operating machine:
- - Make sure all safety devices are in place
and operate properly.
3. When using machine:
- - Do not run machine over cord.
- - Do not pull machine by plug or cord.
- - Do not pull cord around sharp edges or
corners.
- - Do not unplug by pulling on cord.
- - Do not stretch cord.
- - Do not handle plug with wet hands.
- - Keep cord away from heated surfaces.
EX- -SC- -3840 / EX- -SC- -3851 (04- -10)
Home Find... Go To..
- - Report machine damage or faulty operation
immediately.
- - Follow mixing and handling instructions on
chemical containers.
4. Before leaving or servicing machine:
- - Turn off machine.
- - Unplug cord from wall outlet.
5. When servicing machine:
- - Unplug cord from wall outlet.
- - Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
- - Use manufacturer supplied or approved
replacement parts.
WARNING: Hazardous Voltage. Shock or
electrocution can result. Always unplug machine
before servicing.
WARNING: Flammable materials can cause an
explosion or fire. Do not use flammable materials
in tank(s).
WARNING: Flammable materials or reactive
metals can cause an explosion or fire. Do not pick
up.

GROUNDING INSTRUCTIONS

Machine must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to
reduce the risk of electrical shock. This machine is
equipped with a cord having an
equipment- -grounding conductor and grounding
plug. The plug must be plugged into an
appropriate outlet that is properly installed in
accordance with all local codes and ordinances.
Do not remove ground pin; if missing, replace plug
before use.
Grounded
3 Hole Outlet
Ground Pin
(120V)
OPERATION
EN
Grounded Outlet
Grounding
Edge/hole
(220V/230V/240V)
3