Servicing Machine; Storing Machine; Recommended Stock Items - Tennant EX-SC-3840 Manual Del Operario

OPERATION
EN

SERVICING MACHINE

WARNING: Hazardous Voltage. Shock or
electrocution can result. Always unplug machine
before servicing.
FOR SAFETY: When servicing machine, use
manufacturer supplied or approved replacement
parts.
To access internal components for repair, open
machine as described below.
1. Remove two hex--head bolts at front of machine,
using a 9/16" wrench.
ATTENTION: Make sure tanks are empty before
opening.
2. Hinge tank backwards away from chassis
(Figure 10).
FIG. 10
3. When closing machine, be careful not to pinch any
internal hoses or wiring.
8
Home Find... Go To..

STORING MACHINE

1. Before storing machine, be certain to flush tanks
and drain machine of all water.
2. Store machine in a dry area in the upright position
with brush raised off floor.
3. Remove recovery dome to promote air circulation.
ATTENTION: Do not expose to rain. Store indoors.
ATTENTION: If storing machine in freezing
temperatures, be sure that machine, pump and
spraying system are completely drained and dry.

RECOMMENDED STOCK ITEMS

Refer to the Parts List manual for recommended stock
items. Stock Items are clearly identified with a bullet
preceding the parts description. See example below:
EX- -SC- -3840 / EX- -SC- -3851 (04- -10)