Tripp-Lite SmartOnline S3M10K1B Manual Del Propietário página 52

Sistemas ups trifásicos
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Operation
4. Click the Battery Setup icon and select the configuration to be changed/saved. Click the Back icon to return to the
previous window, or click the Home Page icon to jump to the main page.
Note: The UPS configuration for the battery cabinet model depends on the S3M UPS model and battery cabinet model being connected
together. Please refer to the S3M-Series battery cabinet manual for specific UPS configuration instructions.
Battery Group: The Battery Group is quantity 1 for every set of 20 batteries that are within the UPS and/or the battery
cabinet connected to the UPS. For example, UPS model S3M20K3B with 60 internal batteries would be set to Battery
Group 3. However, to connect a BP240V09 cabinet with 80 internal batteries to the S3M20K3B, the S3M20K3B UPS
must be configured to Battery Group 7. The value can be 1 to 8. The default value is 1.
Battery number: The default value is 20. The battery number must remain at 20 for all S3M10-100K UPS models
whether used with or without Tripp Lite external battery cabinets designed for the S3M-Series UPS line.
Single Battery (Ah) Capability: Modify the value to the individual Ah capacity for one battery. The value can be 7 to
2000. If the 10-20kVA UPS model has internal batteries, this value should only be 9, because the 10-20kVA UPS only fits
9Ah internal batteries. However, if the 10-20kVA UPS models have the suffix "-NIB" (No Internal Batteries)," the number
could be 9 (9Ah) to 65 (65Ah), when using Tripp Lite battery cabinet models.
Figure 4-28A: Battery Setup
52

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido