Alarms, Leds And The Lcd Display; Overview Of Audible Alarms And Led Indicators; Lcd Control Panel Introduction - Tripp-Lite SmartOnline S3M10K1B Manual Del Propietário

4. Operation

4.3 Alarms, LEDs and the LCD Display

4.3.1 Overview of Audible Alarms and LED Indicators

UPS Initialization
UPS Online Mode (Normal)
UPS Battery Mode
UPS Battery Test Mode
UPS ECO Mode
UPS
Modes
UPS Standby Mode
UPS Static Bypass Mode
UPS Maintenance Bypass Mode
UPS Frequency Converter Mode
Overload
(Bypass Mode or Battery Mode)

4.3.2 LCD Control Panel Introduction

The built-in LCD display is feature-rich and intuitive to use. The following covers the main features accessible through the display.
Note: Most settings cannot be changed when the UPS is in inverter mode.
1
2
3
4
1
Alarm LED
2
Bypass LED
3
Battery LED
Audible Alarms
Alarm Mutable
Status On/Off
Beeps,
No
Only Once
No Beeps No Beeps
Beeps/2 Seconds Yes
No Beeps No Beeps
No Beeps No Beeps
No Beeps No Beeps
No Beeps No Beeps
No Beeps No Beeps
No Beeps No Beeps
Beeps/1 Second Yes
5
Figure 4.6: Overview of the operating panel of the UPS
39
Alarm Bypass
Blink/ Blink/
0.5 Second 0.5 Second
OFF OFF
OFF OFF
OFF OFF
OFF ON
OFF OFF
OFF ON
OFF ON
OFF OFF
OFF ON
4
Inverter LED
5
Touchscreen LCD Screen, 5 in. (127 mm)
6
EPO Button (button must be pressed for at least
3 seconds to activate EPO)
Display LEDs
Battery Inverter
Blink/ Blink/
0.5 Second 0.5 Second
OFF ON
ON OFF
ON OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF ON
ON OFF
6