Important Features; Remote Control; Inserting Batteries - Revell Control GLOWEE Manual Del Usuario

24089

IMPOrTaNT FeaTUreS

Micro helicopter:
• New coaxial rotor system with
electronic gyro for outstanding flight
characteristics
• Sturdy plastic hull with headlamp
• Integrated rechargeable LiPo battery
(Lithium Polymer battery)
Safety instructions:
• This helicopter is only suitable for use
indoors and not for use outdoors.
• This helicopter is suitable for pilots who
are at least 15 years of age. Adult
supervision is required when flying it.
• Keep your hands, face, hair and loose
clothing away from the rotor.
• Switch off the remote control and
helicopter when they are not in use.
• Remove the batteries from the remote
control when it is not in use.
• Always maintain visual contact with the
helicopter in order to avoid losing
control of it.
• We recommend new alkali manganese
batteries for the remote control.
• As soon as the remote control no longer
functions reliably, new batteries should
be inserted.
• Please keep this operating manual safe
for later use.
• The user should only operate this
helicopter in accordance with the
instructions for use in this operating
manual.
• Do not fly the helicopter near people,
animals, bodies of water or power lines.
• The charging unit for the LiPo battery is
specially designed for charging the
helicopter battery. The charging unit
may only be used to charge the
helicopter battery, not other batteries.
12
• Uncomplicated charging of the battery
directly through the charging unit with
microprocessor-monitored charge
control integrated in the remote
control
Maintenance and care:
• Please only use a clean, damp cloth
to wipe off the helicopter.
• Protect the helicopter and batteries
from direct sunlight and/or direct
heat.
• Never allow the helicopter to come
into contact with water. This may
result in its electronics becoming
damaged.
Remote control battery safety
instructions:
• Non­rechargeable batteries may not
be charged.
• Rechargeable batteries must be
removed from the remote control
prior to recharging.
• Rechargeable batteries may only be
charged under the supervision of an
adult.
• The combination of different types of
batteries as well as new and used
batteries must be avoided.
• Only recommended batteries or those
of an equivalent type may be used.
• Single­use batteries for this remote
control and other electrical devices
operated in the home can be
replaced with environmentally-friendly
rechargeable batteries.
• Batteries must be inserted according
to the correct polarity (+ and -).
• Depleted batteries must be
removed from the remote control.
• The connection terminals may not
be short-circuited. Please remove
the batteries from the remote
control if it will not be used for an
extended period of time.
The helicopter is equipped with
a rechargeable lithium polymer
battery. Please observe the
following safety instructions:
• Never throw LiPo batteries into a
fire or store them in a hot location.
• Only use the charging unit inte-
grated in the remote control for
charging.
• When disposing of batteries, they
must be discharged or their
capacity must be fully depleted.
Cover exposed terminals with
adhesive tape in order to prevent
short-circuiting!
Safety instructions:
• The product may never be structur-
ally modified. This may lead to it
becoming damaged or posing a
danger.
• Avoid the risk of danger by never
operating the aircraft while sitting
on the ground or in a chair.
Operate the aircraft from a position
that allows easy evasion if
needed.
• Always switch off the aircraft and
the remote control after use.
Otherwise, it is possible for the
model to be unintentionally
started.
Required batteries for t he
helicopter:
Power supply: ===
Rated output: DC 3.7 V / 150 mAh /
0.56 Wh
Batteries: 1 x 3.7 V rechargeable
LiPo battery (integrated)
Capacity: 150 mAh
USB charger:
Power supply: ===
Rated output: 5 V / 500 mA
Battery requirement
for the re mote control:
Power supply: ===
DC 9 V
Batteries: 6 x 1.5 V "AAA"
(not supplied)
1 helICOPTer
1A Stabiliser 1D Charge socket
1B Counter-rotating 1E Landing skid
rotor blades
1G ON/OFF switch
1C Search head-
lamp

2 reMOTe CONTrOl

2A GHz antenna 2G Left/right trim
control
2B Turbo button
2H Forward and
2C Up/Down thrust
backward flight.
control
Fly left/right,
2D Charge LED
lamp switch
2E ON/OFF switch
2I Charge cable
2F Power LED
compartment

3 INSerTINg BaTTerIeS

(reMOTe CONTrOl)
3A Unscrew and remove the cover.
3B Insert 6 x 1.5 V AAA batteries and
pay attention to the polarity, as
shown in the battery compartment.
3C Close the battery cover and secure
with the screw.
13