Resumen de contenidos para Canon PIXMA MG5220 Serie
Página 1
ENGLISH ESPAÑOL Canon Inkjet Photo All-In-One Equipo multifunción fotográfico Canon Inkjet series Getting Started Read Me First Guía de inicio Léame en primer lugar Make sure to read this manual before using the machine. Please keep it in hand for future reference.
■ Contents ■ Symbols Used in This ■ Contenido ■ Símbolos utilizados en este Document documento 1 Preparation P.4 1 Preparativos P.4 Prohibited actions. Acciones prohibidas. 2 Install the Print Head P.7 2 Instalación del cabezal de impresión P.7 3 Install the Ink Tanks P.10 Instructions including important 3 Instalación de los depósitos de tinta P.10 Instrucciones que incluyen...
■ Machine Network Connection Installation Flow Conexión de red USB Connection ■ Flujo de instalación Conexión USB Wireless Connection Using from Additional Computers del equipo Conexión inalámbrica (when the machine is already connected to the network and you want to add computers from which to use the machine) Uso desde ordenadores adicionales Machine Preparation...
On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. For some languages parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 45. Los manuales en pantalla se pueden ver en un ordenador.
Página 5
■ Devices Required for Wireless Connection ■ Dispositivos necesarios para la conexión inalámbrica When using the machine over a wireless connection, the following devices are required. Cuando utilice el equipo mediante una conexión inalámbrica, se necesitan los siguientes dispositivos. Access point or wireless router Punto de acceso o router inalámbrico A commercial access point or router that supports IEEE802.11b/g/n is required.
Página 6
Remove all orange tape and protective materials from the inside • Do not install the machine where an object may fall on it. In addition, and outside of the machine. do not place any object on the top of the machine. It may fall into the machine when opening covers, resulting in malfunction.
Página 7
Make sure all the following items are supplied. Insert the power cord into the connector on the machine and into the wall outlet firmly. Some accessories (1) are stored within the Paper Output Tray (A). Open the Paper Output Tray to remove them. 1.
Página 8
Press the ON button (B), then adjust the LCD (Liquid Use the { or } button (D) on the Operation Panel to When the above screen is displayed, press the OK Crystal Display) (C) to a comfortable viewing angle. select the language for the LCD, then press the OK button and go to the next step.
Página 9
Lift the Scanning Unit (Cover) (A) until it stops. The Print Head Holder (C) moves to the installation position. Close the Document Cover (B) and lift it with the Scanning Unit (Cover). If the Print Head Holder does not move, make sure that the machine is turned on.
Página 10
Firmly lift the part (D) of the Print Head Lock Lever in the Print Head Holder Remove the Print Head from the silver Remove the orange protective cap. until it stops. package. • Do not touch the inside (E) or metal parts (F) of the Print Head. The machine may not print properly if you touch them.
Página 11
Tilt the Print Head forward and set it in place as shown. Hold the Print Head Lock Lever firmly and lower it completely. • Do not knock the Print Head against the sides of the holder. • Once you have installed the Print Head, do not remove it unnecessarily. Incline el cabezal de impresión hacia adelante y sitúelo como se muestra.
Página 12
1. Remove the orange tape Hold the ink tank with the orange Hold the ink tank by its sides and slowly twist the orange completely. protective cap (A) pointing up while protective cap 90 degrees horizontally to remove it off. being careful not to block the L-shape 2.
Página 13
Tilt the ink tank, then insert it under the label and Press the PUSH mark on the ink tank firmly until it clicks. Install all the other ink tanks in the same way against the back end of the slot. according to the color order indicated on the label.
Página 14
Make sure that the LCD changes as shown in the illustration and go to the next step. Lift the Scanning Unit (Cover) (E) slightly, then gently close it. Make sure the Inner Cover (F) is closed. Do not press the OK button yet. •...
Página 15
Prepare the Paper Support (A). Move the Paper Guides (B) Load a sheet of supplied specialty paper for Print Head Alignment to both edges. (Matte Photo Paper MP-101) in the Rear Tray (C). 1. Open it. Load paper so that the cut corner (D) is at the top right. 2.
Página 16
Make sure the Paper Slide the left and right Press the OK button. When the blue and black pattern is printed, remove Confirm the above Output Tray (E) is open, Paper Guides against the printed paper. message, then go to the then open the Output both edges of the paper.
With the machine, the paper source varies □ How to load specialty paper in the Rear Tray depending on the media type. □ Cómo se carga el papel especial en la bandeja posterior Con el equipo, el origen del papel varía en función del tipo de soporte.
Página 18
Pull out the Cassette (F). Move the left Paper Guide (G) to Slide the front Paper Guide (H) Load plain paper. the edge. to align with the actual size of Load paper with the printing side the paper. facing down. The front Paper Guide will click and stop when it aligns with the corresponding mark of paper size.
Página 19
Align the paper to the right side of the Insert the Cassette slowly into the Confirm the message on the LCD, then press the OK button. Cassette (1), and slide the left Paper machine until it clicks into place. The HOME screen appears. Guide completely against the left edge of the paper (2).
Intended Use Connection Method Uso previsto Método de conexión • Want to connect to a computer with a USB cable. USB Connection Go to "7 Install the Software (USB • Si desea conectar a un ordenador con un cable USB. Connection)"...