When Installing The Microphone On The Steer; Adjusting The Microphone Angle - Pioneer AVIC-X1BT Manual Del Usuario

Ocultar thumbs Ver también para AVIC-X1BT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
When installing the microphone on the steering column
1. Install the microphone on the microphone clip.
Microphone
Microphone clip
2. Install the microphone clip on the steering column.
Double-sided tape
Install the microphone clip on
the rear side of the steering
column.
• It is extremely dangerous to allow the microphone lead to become wound
around the steering column or gearstick. Be sure to install the unit in such a
way that it will not obstruct driving.

Adjusting the microphone angle

The microphone angle can be adjusted by moving forward or backward the microphone
clip angle.
Fit the microphone lead
into the groove.
Clamps
Use clamps to secure the
lead where necessary
inside the vehicle.
28

Publicidad

Tabla de contenido
loading

Tabla de contenido