Infiniton SSDC-4630 Manual De Instrucciones página 15

D.Indoor unit installation space dimension
E.Installation of indoor unit
1.The selection of install location
(1) Sufficient strength to ensure that on top hanging parts to bear the weight of the unit.
(2) Water is easily discharged from the drain.
(3) Accessible in import and export, to maintain good air circulation.
(4) In indoor unit, the install distance required in figure 5 must be ensured to make sure the space required by
repair and maintenance is kept.
(5)Away from place of heat, flammable gas leakage and smoke.
(6)The machine is ceiling mounted (ceiling built-concealed installation).
(7)Indoor, outdoor, power cord, connecting wires should keep at least 1 m away from the TV, radio. This is to
prevent image interference and noise in above mentioned home appliances. (Even with a distance of 1
m, if the generated wave is strong, it may occur noises)
2.The installation of the indoor unit
a.Insert M10 expansion bolt into the hole, then knock the nails into the bolt, for the pitch referring to figure 4,
the installation of expansion bolts is shown in figure 6.
4.Installation guide
From the groud≥2.2m
Figure 7
Hoisting bolts
Figure 8
10
Units
Hook