Infiniton CCFL-4530 Manual De Instrucciones página 13


Select the location that is easy to drain condensate, and easy to connect outdoor unit.

Keep far away from flammable materials, such as curtain, clothes especially.
◆
Select the installation location for the outdoor unit
Please install on the location that meets the following conditions and has
the permission from user.

Somewhere that the noise and airflow from the discharge does not affect neighbors.

Good ventilation, make sure the outdoor unit has good ventilation.

Meet related requirements of environmental protection and cityscape and firefighting.

No obstructions to hinder the inlet and outlet of the outdoor unit.
 Installation location should be able to withstand the weight of the outdoor unit and its
vibration, in order to avoid noise and vibration enlarging in the transmission. Also it
should be safe for installation construction. The mounting surface must be reinforced
concrete structures or equivalent structures. The material and structure design and
manufacture of mounting bracket should fully consider the load-bearing strength,
corrosion resistance, and it should be convenient for fixing. Iron/steel components
should be securely welded or connected and rust treated. The loading capacity of outdoor
unit mounting surface (mounting bracket) should not less than at least 200 kg.

For hanging installation, the mounting surface should be solid bricks, concrete or the
equivalent strength structure with sufficient loading capacity, otherwise you should take
reinforce, bracing, vibration reduction and other measures. The connecting between
mounting surface and mounting bracket, mounting bracket and air conditioner should be
secure, stable and reliable, make sure the air conditioner is installed without sliding,
overturning and falling down.

Somewhere that has no leakage of flammable or corrosive gases.

Installed in the following places may cause malfunctions of the air conditioner. If it is
unable to avoid, please contact the service point.
◇
Somewhere that has machine oil
◇
Saline areas in the seaside
◇
Somewhere that has sulfur-containing gases (such as sulfide hot spring)
◇
Somewhere that has frequency conversion facilities, such as RF facilities, welder
machines, medical equipments, that radiates strong EMI.
◇
Avoid installing to the side that has heavy sandstorm, smoking from factories, strong
sea wind.
◇
Special surrounding conditions.

Choose somewhere that there is no rain, no direct sunlight and also good ventilated
place as far as possible. If it is unable to avoid, you should make a shelter, but pay
attention to the condenser heat dissipation, it must not be hindered.
 The installation location should be better not rearing animals or planting trees or flowers.
 Please avoid the location that may has flammable or explosive gas leakage.

Convenient to install and operate, avoid strong wind, and also dry and good ventilated.

The main requirements of spatial position to install outdoor unit:
≧
Left 30 cm, right
4.Installation guide
≧ ≧
60 cm, back 30 cm, front
9
≧
200 cm