Siemens SITRANS FUH1010 Instrucciones De Servicio página 24

Ocultar thumbs Ver también para SITRANS FUH1010:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Commissioning
3.4 Setting the Parameters
4. Trigger <ENTER> sensor to save the Site name.
Note
To set English or Metric units: In Meter Type Menu, scroll to Meter Facilities Menu. Press
<Right Arrow> and select desired units. Press <ENT> to select. Press <Left Arrow> and
<Up Arrow> to return to Meter Type Menu.
Note
To select alpha-numeric characters: Press <Right Arrow> to cursor and then trigger
<Up/Down Arrow> to select letters and numbers. Trigger <ENTER> when done
5. Trigger <Left Arrow> and return to [Channel Setup]. Trigger <Down Arrow> to select
Select Pipe Class
1. Trigger <Right Arrow> to select [Pick Pipe Class].
2. Trigger <Right Arrow> again. Trigger the <Up/Down Arrows> to scroll to desired Pipe
3. Trigger <ENTER> to select Pipe Class.
4. Trigger <Right Arrow> sensor. Trigger <Up/Down Arrows> to scroll to select desired Pipe
5. Trigger <ENTER> to save Pipe Size selection.
22
Note site name field is initially blank.
(?) indicates cell is ready to accept data. Cursor shown at 1st character position.
Insert desired name (8 Characters max.)
[Pipe Data].
Class.
Size.
SITRANS FUH1010 Quick Start Guide
Operating Instructions, 1/2009, CQO:QSG009 Rev A

Publicidad

Tabla de contenido
loading

Tabla de contenido