Sirona CEREC AC Instrucciones De Montaje página 28

2 Installing the wireless module
Installing the wireless module
10
Installation Instructions for Wireless Module HW8614 Retrofit Kit CEREC AC
Installing the wireless module
1. Fasten the holder for the wireless module to the acquisition unit with two
screws (A).
or
➢ If no fastening holes are present, attach the holder with the supplied
Velcro strap.
2. Push the wireless module into the holder.
3. Connect the feed cable (B) to the wireless module.
4. Connect the LAN cable (C) to the upper connection of the wireless
module and run it along the housing to the PC.
5. Connect the LAN cable to the LAN interface on the PC.
Sirona Dental Systems GmbH
B
A
C
62 80 056 D 3492
D 3492.092.04.01.02 08.2009