2 Installing the wireless module
Installing the upper side cover
12
Installation Instructions for Wireless Module HW8614 Retrofit Kit CEREC AC
2.6
Installing the upper side cover
NOTICE
The middle screw (B2) is an M4x10 machine screw; the other two screws
(B1) are self-tapping screws.
1.
Hold the upper side cover with attached antenna against the stop at the
front and twist in the rear half until the upper side cover is flush.
2.
Attach the upper side cover using three screws (B). Use the washer for
the middle screw (B2).
Sirona Dental Systems GmbH
62 80 056 D 3492
D 3492.092.04.01.02 08.2009